How To Care For Your Cast Iron Pans?
We have five cast iron frying pans of varying sizes . Our largest on is about 22 inches round , next we have one 10 inches by fourteen inches , its rectangle. Then we have another smaller square one and two smaller round ones. And they are old and coveted . We look after them like they are our babies.
Our girls have already laid claim to them when we no longer are going to use them. The two big ones even have names. Everyone laughs , but they are well cared for.
We cook about 80 % of our food in cast iron and will never be changing .
So check out the do’s and don’ts …
The Truth About Cast Iron Pans: 7 Myths That Need To Go Away
MYTH #1: “CAST IRON IS DIFFICULT TO MAINTAIN.”
The Theory: Cast iron is a material that can rust, chip, or crack easily. Buying a cast iron skillet is like adopting a newborn baby and a puppy at the same time. You’re going to have to pamper it through the early stages of its life, and be gentle when you store it—that seasoning can chip off!
The Reality: Cast iron is tough as nails! There’s a reason why there are 75-year-old cast iron pans kicking around at yard sales and antique shops. The stuff is built to last and it’s very difficult to completely ruin it.
And as for storing it? If your seasoning is built up in a nice thin, even layer like it should be, then don’t worry. It ain’t gonna chip off. I store my cast iron pans nested directly in each other.
MYTH #2: “CAST IRON HEATS REALLY EVENLY.”
The Theory: Searing steaks and frying potatoes requires high, even heat. Cast iron is great at searing steaks, so it must be great at heating evenly, right?
The Reality: Actually, cast iron is terrible at heating evenly. Throw a cast iron skillet on a burner and you end up forming very clear hot spots right on top of where the flames are, while the rest of the pan remains relatively cool.
The main advantage of cast iron is that it has very high volumetric heat capacity, which means that once it’s hot, it stays hot. This is vitally important when searing meat. To really heat cast iron evenly, place it over a burner and let it preheat for at least 10 minutes or so, rotating it every once in a while.
Cast iron, on the other hand, has a whopping .64 emissivity rating, which means that when you’re cooking in it, you’re not just cooking the surface in contact with the metal, but you’re cooking a good deal of food above it as well. This makes it ideal for things like making hash or pan roasting chicken and vegetables.
MYTH #3: “MY WELL-SEASONED CAST IRON PAN IS AS NON-STICK AS ANY NON-STICK PAN OUT THERE.”
The Theory: The better you season your cast iron, the more non-stick it becomes. Perfectly well-seasoned cast iron should be perfectly non-stick.
The Reality: Your cast iron pan (and mine) may be really really really non-stick—non-stick enough that you can make an omelet in it or fry an egg with no problem—but let’s get serious here. It’s not anywhere near as non-stick as, say, Teflon.
Yeah, didn’t think so.
That said, macho posturing aside, so long as your cast iron pan is well seasoned and you make sure to pre-heat it well before adding any food, you should have no problems whatsoever with sticking.
MYTH #4: “YOU SHOULD NEVER WASH YOUR CAST IRON PAN WITH SOAP.”
The Theory: Seasoning is a thin layer of oil that coats the inside of your skillet. Soap is designed to remove oil, therefore soap will damage your seasoning.
The Reality: Seasoning is actually not a thin layer of oil, it’s a thin layer of polymerizedoil, a key distinction. In a properly seasoned cast iron pan, one that has been rubbed with oil and heated repeatedly, the oil has already broken down into a plastic-like substance that has bonded to the surface of the metal. This is what gives well-seasoned cast iron its non-stick properties, and as the material is no longer actually an oil, the surfactants in dish soap should not affect it. Go ahead and soap it up and scrub it out.
The one thing you shouldn’t do? Let it soak in the sink.
MYTH #5: “DON’T USE METAL UTENSILS ON YOUR CAST IRON PAN!”
The Theory: The seasoning in cast iron pans is delicate and can easily flake out or chip if you use metal. Stick to wood or nylon utensils.
The Reality: The seasoning in cast iron is actually remarkably resilient. It’s not just stuck to the surface like tape, it’s actually chemically bonded to the metal. Scrape away with a metal spatula and unless you’re actually gouging out the surface of the metal, you should be able to continue cooking in it with no issue.
MYTH #6: “MODERN CAST IRON IS JUST AS GOOD AS OLD CAST IRON. IT’S ALL THE SAME MATERIAL, AFTER ALL.”
The Theory: Metal is metal, cast iron is cast iron, the new stuff is no different than the old Wagner and Griswold pans from early 20th century that people fetishize.
The Reality: The material may be the same, but the production methods have changed. In the old days, cast iron pans were produced by casting in sand-based molds, then polishing the resulting pebbly surfaces until smooth. Vintage cast iron tends to have a satiny smooth finish. By the 1950s, as production scaled up and was streamlined, this final polishing step was dropped from the process.
The difference is more minor than you may think. So long as you’ve seasoned your pan properly, both vintage and modern cast iron should take on a nice non-stick surface, but your modern cast iron will never be quite as non-stick as the vintage stuff.
MYTH #7: “NEVER COOK ACIDIC FOODS IN CAST IRON.”
The Theory: Acidic food can react with the metal, causing it to leech into your food, giving you an off-flavor and potentially killing you slowly.
The Reality: In a well-seasoned cast iron pan, the food in the pan should only be coming in contact with the layer of polymerized oil in the pan, not the metal itself. So in a perfect world, this should not be a problem. But none of us are perfect and neither are our pans.
For this reason, it’s a good idea to avoid long-simmered acidic things, particularly tomato sauce. On the other hand, a little acid is not going to hurt it.
WHAT YOU SHOULD DO
These are the only rules you need to know to have a successful lifelong relationship with your cast iron.
- Season it when you get it.Even pre-seasoned cast iron can do with some extra protection. To season your pan, heat it up on the stovetop until its smoking hot, then rub a little oil into it and let it cool. Repeat this process a few times and you’re good to go.
- Clean it after each use. Clean your pan thoroughly after each use by washing it with soap and water and scrubbing out any gunk or debris from the bottom. I use the scrubby side of a sponge for this.
- Re-season it. Rinse out any excess soap with water, then place the skillet over a burner set to high heat. When most of the water inside the skillet has dried out, add a half teaspoon of a neutral oil like vegetable, canola, flaxseed, or shortening. Rub it around with a paper towel. Continue heating the pan until it just starts to smoke then give it one more good rub. Let it cool and you’re done.
- Fry and Sear in it. The best way to keep your seasoning maintained? Just use your pan a lot! The more you fry, sear, or bake in it, the better that seasoning will become.
- Don’t let it stay wet. Water is the natural enemy of iron and letting even a drop of water sit in your pan when you put it away can lead to a rust spot. Not the end of the world, but rust will require a little scrubbing and reseasoning. I always dry out my pan with a paper towel and coat it with a tiny amount of oil before storage.
Article and photo’s by : J. Kenji Lopez-alt