This Is A Very Simple And Easy Laundry Soap To Make! And Very Budget Friendly!
If I can make this you can make it. And I did and it works. I had heard about it from a friend and so decided to make my own and save some money on soap.
You will need a large pot to cook the ingredients in and a large pail with a lid to store it in.
My friend gave me the recipe but here it is with an explanation of all the things you need and how to cook it.
I found this on line and its just about exactly what I use.
You will need 1 cup of washing soda
1/2 cup borax
1 bar of soap
and approximately 3 gallons of water.
You’ll also need a container of some sort to store this in (I use a five gallon bucket with a lid), something to stir it (I use a large wooden spoon), another pot to boil soapy water in (I use the pot in the picture), and something to cut up the soap (I use the box grater in the picture).
First thing, put about four cups of water into the pan and put it on the stove on high until it’s at boiling, then lower the heat until it’s simmering.
While it’s heating up, take a bar of soap and cut it up into little bits. I found a lot of success using our box grater, which resulted in a ton of little soap curls.
When the water is boiling, start throwing in the soap. I recommend just doing a bit at a time, then stirring it until it’s dissolved. Here, I made the mistake of just tossing in all of the soap at once, which wasn’t particularly helpful:
Stir the soapy water with a spoon until all of the soap is dissolved. Eventually, the water will take on the color of the soap you added, albeit paler. I used Pure & Natural soap for this, which was a white soap that looked a lot like a bar of Ivory.
In the end, you’ll have some very warm soap soup:
Next, get out your large container and add three gallons of warm tap water to it. I’m using a bright orange five gallon bucket that I had lying around:
To this bucket add a cup of the washing soda and the soap solution you made and stir. The borax is optional – some people say that it’s too harsh, but I’ve always found that it did a good job getting clothes clean and fresh smelling, so I recommend adding a half cup of borax to the mix.
After stirring, you’ll have a bucket full of vaguely soapy water:
Don’t worry if your batch doesn’t match the color of my own – it varies depending on what kind of soap you use. I made a batch with Lever 2000 in the past and it had a greenish tint to it, and I’ve heard reports of all kinds of different colors from other people who have tried this.
At this point, let the soap sit for 24 hours, preferably with a lid on it. I just took our bucket to the laundry room.
When you take off the lid, you’ll find any number of things, depending on the type of soap you used and the water you used. It might be firm, like Jello; it might be very watery; it might even be like liquid laundry detergent. Just stir it up a bit and it’s ready to be used.
Just use a measuring cup and use one cup of the detergent per load of laundry. If it’s got “globs” in it, get a mix of the water and of the globs – it’ll break up very quickly in the washing machine and wash your clothes well. If you’re still concerned, you can mash up the globs quite easily, but I saw no reason to do so.
Article and photo’s by:The Simple Dollar